中文官网|English

Consultation Telephone:18912005511

Product

PRODUCTS CENTER

Your current location:Home - Product - Other Products
  •  Co2 extractor
  •  Co2 extractor
  •  Co2 extractor
  •  Co2 extractor
  •  Co2 extractor
  •  Co2 extractor
  •  Co2 extractor

Co2 extractor

National Advisory Hotline

18912005511

60 seconds of manual response, giving technical advice within 30 minutes

Pproduct Description

Carbon dioxide liquid gas phase change expansion technology (also known as; Carbon dioxide extractor (co2 extractor) is a co2 fracturing device developed by the British company CARDOX in the 1950s, which was certified as non-explosive by the British safety and health council at that time.

Carbon dioxide extraction technology is to use the principle of instant liquid carbon dioxide absorption of heat expansion, liquid carbon dioxide through dedicated installed injected crack filling device inside the liquid storage tube, start heating device to produce a lot of heat, make the tube liquid carbon dioxide moment gasification, liquid carbon dioxide expands quickly gasification 600 times, when the inner gas pressure exceeds constant pressure shear piece of ultimate strength (set), gas break through constant pressure shear released from can drain hole, instant powerful air impact, along the target body made material in natural fractures and pushes it away from the main body, so as to achieve the aim of pre-splitting loose. After each use can be filled with new heating device (activator), energy release shear plate, filled with liquid carbon dioxide reuse.


24.jpg

Components:

1. High strength reusable steel tube -- it is made of alloy steel with high yield strength and can withstand high pressure and high temperature. It is used to store liquid carbon dioxide.

2, heating device (activator) -- starter, heating material, packaging material composition, is to provide heat device, heating material is several kinds of chemical materials made, it must have fire resistance, that is, under normal temperature and pressure can not be lit or detonated open fire. Under a certain uniform confining pressure, it can ignite and do work, and the reaction speed and calorific value can be adjusted as needed.

3. Energy release component -- used for fixing shear sheets, sealing gas and high-pressure gas release holes. Release holes in different directions can be used in construction according to the situation.

4. Inflatable component -- closed gas, which is the switch for liquid carbon dioxide to enter the liquid storage pipe, and is connected to the circuit component of the conduction heating device.

5. Constant pressure shear sheet -- it is a component to control the release pressure of gas. Different specifications of shear sheets can be used to obtain different release pressure.


Technical Parameters

Order Online

如If you are interested in our products, or if we have anything to help you, you can always call our national customer service number:18912005511

You can also communicate with us online, of course, you can also leave a message below, we will be happy to serve you!

Aneng Technology Mobile Website
Aneng drilling, efficient and environmentally friendly, focusing on rock mining equipment for 10 years!